Sand roller - workpiece description

The strength of the sand roll refers to the ability of the sand roll to resist its own crushing due to the centrifugal force in the working state of high-speed rotation. In order to ensure that the sand roll does not break in normal operation, the working speed of the sand roll shall not exceed a certain value. This requires dynamic balance to measure and verify.

Applicable models of sand roller: belt balancing machine, universal joint driven balancing machine

Gimbal driven balancer:

Huashun universal joint balancing machine is especially suitable for balancing the outer circle of fans, large motors, water pumps, centrifuges, cots, dryers, internal combustion engines, screen baskets, etc. it is not allowed to use the ring belt driving device or the mechanical rotating parts requiring a large transmission power. The same is true for special rotors with extended center of gravity. The universal joint transmission mode can transfer more power and make the operation more stable. One machine can also choose the drive mode of the ring belt and the drive mode of the universal coupling at the same time.

Belt balancing machine:

Huashun ring belt balancing machine is especially suitable for balancing inspection of rotating parts of motor rotor, fan impeller, water pump impeller, supercharger rotor, centrifuge rotor, rubber roller, machine tool spindle, crankshaft, etc. With the direct drive of the ring belt, the error of the fixture is reduced, the operation is simple, and the detection accuracy is higher.